CALIFORNIA - PLUMBING GUIDE
How to detect a slab leak in your home
A slab leak is a leak in the water pipes that run beneath a home's concrete foundation. Because the pipes are out of sight, the signs are indirect: warm floors, unexplained bills and the sound of water that never stops. This guide explains what to look for and what to do next.
Call 877-762-1902 ↗Independent referral site. Confirm the provider, license, availability and any diagnostic fee before agreeing to work.
What a slab leak is
Many California homes sit on a concrete slab, with copper water lines running underneath it. Over the years those pipes can corrode from the inside, wear where they rub against the concrete or gravel, or be stressed as the soil beneath the slab shifts and settles.
A slab leak usually starts as a pinhole or a small crack, so the early signs are subtle. The goal of the checks below is to work out whether a leak exists at all before worrying about exactly where it is.
Warm or damp patches on the floor
A leak in a hot water line warms the slab above it. Walk the floors in bare feet and note any patch that feels warmer than the rooms around it, especially in hallways, kitchens and bathrooms where the lines run.
Cold water leaks show differently: damp carpet, laminate that warps or lifts, darkened grout, or mould appearing along the bottom of walls. A spot that stays damp in dry weather, with no spill or appliance to explain it, deserves attention.
Sounds, meter movement and falling pressure
Listen for hissing or running water when every tap and appliance is off. A slab leak often makes a faint, constant sound that is easiest to hear at night. Then run the meter test described in the guide to finding hidden leaks in your home plumbing: movement with everything off confirms water is escaping somewhere.
You may also notice water pressure dropping, or the water heater firing more often than usual as it replaces hot water that is leaking away underground.
Cracks, pooling and changes outside
Water escaping under a slab can soften the soil that supports it. New cracks in floor tiles, walls or the slab edge, doors that suddenly stick, and water pooling against the foundation in dry weather can all be downstream effects of a long-running leak.
These signs do not prove a slab leak on their own, since foundations move for other reasons too. Combined with a moving meter or a warm floor, though, they make a strong case for getting the pipes tested.
How providers pinpoint a slab leak
Because the pipes are buried, providers locate slab leaks with equipment rather than guesswork. Listening equipment picks up the sound of escaping water through the slab, a method described on the acoustic leak detection page, and pressure testing confirms which line is losing water. Thermal imaging can also help trace a hot water line and the warm patch it creates.
Pinpointing comes first so that if any part of the floor has to be opened, it is the section above the leak. The guide to leak detection costs in California explains what affects the price of that work.
What to do if you suspect one
Write down what you have noticed and when, and keep your meter readings and a recent water bill together. Photographs of damp patches and cracks help the provider and any later discussions about the damage.
If water is actively soaking floors or walls, turn the supply off at the main shutoff and treat it as urgent: 24/7 emergency service is available for problems that cannot wait, and the emergency plumbing guide covers the first steps. For a slow, stable situation, book leak detection and share your notes when you call.
Questions before you call
What is usually the first sign of a slab leak?
Often a warm or damp patch on the floor, or a water bill that climbs without explanation. A meter that moves while everything is off confirms a leak exists somewhere.
Can I test for a slab leak myself?
You can confirm a leak with the meter test, but pinpointing a leak under concrete takes listening and pressure-testing equipment, so location is a job for a provider.
Does a slab leak always mean the floor has to come up?
Not necessarily. Accurate location comes first, and it helps limit any opening to the area above the leak. The provider should explain the options once the leak is found.
How urgent is a slab leak?
A slow leak can often wait for a booked visit, but water that is actively damaging floors or walls calls for the main shutoff and urgent help.